Deep Cleaning Grouts: Step-by-Step Guide for Stubborn Stains

Grout is a vital component of tiled floors and walls. It gives the tiled surface a finished look and prevents dirt and grime from getting in between tiles.

However, grouts become dull and dingy due to accumulated dirt, stains, grime and mold. The worst part is that these are the most overlooked spots when sprucing up a house or rented property.

But, it is always good to clean your tiles and grout lines on a regular basis to keep mold and mildew at bay.

Here is a step-by-step guide to deep cleaning grouts using non-abrasive cleaning tools and products.

If you are at the end of your lease, then book professionals for an intensive end of lease cleaning in Northern Virginia.

They follow a proper checklist to cover all nooks and crannies, including tiles and grout lines, to help you recover the full bond.

For DIY deep cleaning grout, keep the following methods in mind and achieve great outcomes.

Deep Cleaning Grout: Step-by-Step Guide for Stubborn Stains

Remove Dirt Using Warm Water

Instead of using traditional cleaning products and expensive gadgets, you can use warm water and a non-abrasive brush.

Start by spraying warm water over the grout lines, and scrub in a circular motion.

Do not use excess water, as it can cause damage to the surface due to mildew infestation. So, dry the grout when you remove the accumulated dirt and dust particles.

Note: You can read the labels to know which cleaning products contain ammonia and other harmful chemicals.

Use White Vinegar and Warm Water for caked-on Grime

Dullness on grout is caused due to heavy grime and stains.

It is always good to wipe down your bathroom tiles once or twice a week to prevent the accumulation of dirt and stains.

Here is an effective method to bring back the lost shine of sealed grouts without using expensive products:

• Add one part of white vinegar, 2 tablespoons of dish washing soap liquid and one part of water into a spray bottle.
• Spray it over the surface and let it sit for 5-7 minutes.
• White vinegar contains acetic acid and is a powerful cleaning product due to its acidic properties to help you easily remove grime, soap scum, stains and heavy dirt.
• After that, scrub off the surface using a toothbrush or a non-abrasive brush
• Rinse and dry the surface.

Note: Do not use vinegar solution on unsealed grout, as it can penetrate into the pores and weaken the material. Vinegar can cause damage to the grout by wearing it away.

You should also read: 15 Clever Deep Cleaning Tips

Tackle Mold and Mildew with Hydrogen Peroxide

Hydrogen peroxide is one of the best cleaning products that can kill mold, mildew and other fungi from grout and tiles with ease.

You can make your own eco-friendly cleaning products at home using different natural cleaning products.

Pour one part of 3 per cent hydrogen peroxide into a spray bottle with warm water. You need to spray over the moldy surface and leave it for 10 minutes.

After that, scrub off the grout using a small brush. Make sure you rinse and dry to prevent mold from coming back.

Many trained end of lease cleaners Northern VA bring eco-friendly products to meet customers’ requirements.

Apply Baking Soda For Effective Results

Use this natural cleaner, disinfectant and deodorizer if stain or grime persists. Baking soda is a fantastic cleaning agent that can absorb grime, bad odors and kill germs without causing any damage.

Scrub using a brush or you can also use a wet magic eraser for effective results. Rinse and dry the surface completely.

The best part is that you can use it on sealed as well as unsealed grout to leave your bathroom and kitchen tiles looking sparkling clean.

Related article:Stop Pet Odors: 4 Easy Ways

Seal the Grout

This final step can bring back the shine of your tiled floors and walls. Apply a grout sealer to fill the pores and keep dust and dirt at bay.

Before applying the product, wait at least 24 hours to let the grout dry completely.

It is good to re-apply the grout sealer every two years, especially in bathrooms and the kitchen, to maintain the pristine shine of your beautiful tiles.

Change Your Grout If Required

You may need to change the grout if it is breaking apart. Get a new one, as the cracked one can cause more damage and leave your tiled surface in the worst condition.

It is good to call the professionals who can install the new grout, especially if you are at the end of your lease.

Make sure you do necessary property repairs before calling end of lease cleaning Northern VA experts to retrieve deposited security quickly.

Wrapping Up

Deep cleaning grouts can be time-taking, but these simple yet effective tips will help you maintain dirt-free and shiny tiles.

You can effectively remove stubborn stains on your grout lines without causing any damage to the surface.

With a little patience, you can restore the beauty of your tiles and enjoy a clean home.